Vintage Motorcycles

Vintage Motorcycles

Clive Brown rides with history

  • Feb. 5, 2020 8:30 a.m.

– Story by Maggie Jackson Photography by Don Denton

Clive Brown, owner of Pizzability on the West Shore, loves buying, restoring, fixing and riding vintage motorcycles. His garage and basement are filled with vintage bikes. The wall of his garage is lined with Iron Butt Association certificates, a few earned while riding his classic bikes. “You must complete a 1,000 mile (1,600 km) in 24 hours ride, fully documented with receipts etc. with a witness to sign the paperwork at the start and end of the ride, before you do any of the extreme rides” Clive explained. “I think I have about 40 certificates, including numerous extreme and theme rides.”

Clive has always loved vintage motorcycles. “When I was six, I found my grandfather’s Rudge in the garage. I was in awe of all the controls. It was so big and huge and screamed adventure. I wondered what my grandfather did on that motorcycle; where he went and what he saw.”

When he was eleven, Clive’s dream of owning a motorcycle came true. “My older cousin gave me a Triumph Tiger Cub that didn’t run. He told me I could have it if I could fix it. We brought it home and pushed it up and down the streets for a month trying to get it started. It finally started when it was my turn to “ride” it. It must have been a fuel issue, as carburetors get gummed up. Once we got it started, my mother told me it had to go!”

At 14, Clive and his family emigrated from England to Alberta. To Clive’s delight he discovered being 14 meant he could get a motorcycle licence. He bought a Honda CB 100, then a 1976 Suzuki GS750.

Clive’s love of classic bikes is entrenched into his life. “While I love super high-tech bikes, the appeal of the classics is that they aren’t high-tech. They have carburetors and points and if something happens to them I can fix them at the side of the road.”

While he has plenty of classic motorcycles to enjoy, there’s still one that he’d like to get. “My most desired motorcycle is a 1937 Rudge. It was prewar so it had a girder front end with a huge headlight. They’re so classic and unique in the way they were constructed and engineered. It had linked brakes which was unheard of until they were subsequently introduced in the Goldwing.”

Three classics Clive is particularly fond of are his: Jawa Perak, Chang Jiang and FZR250 Yamaha.

“The Jawa Perak has the best history,” Clive said. “The prototype was manufactured and 20,0000 km put on it during the Nazi occupation of Czechoslovakia during WWII. They weren’t allowed to work on anything that wasn’t related to the Nazi war effort. The Czechs, right under the noses of the Nazis, engineered this 250 cc dual exhaust port two stroke motorcycle. They got away with it by putting a fake SS licence plate on the back. When stopped, they told the guards it was a secret SS project. They named the bike Perak, which has two meanings: mythical super hero or a cell of freedom fighters. The motor is a work of art, very art deco to look at. Gearheads see it as a thing of beauty. The bike was introduced in 1948 at the World’s Fair and took the gold medal.”

The Chang Jiang came to Clive partially restored. “These motorcycles are assembled in China from a huge inventory of parts. The Chinese government had set up factories to just have people make things. In many cases they were way overproduced. Once they stopped producing parts, some independents started purchasing them and putting motorcycles together.”

The actual manufactured year of Chang Jiangs are a grey area. “Mine is registered as a 1968 motorcycle, but it could have been put together a few years ago from 1968 parts,” Clive explained. “The vast majority you will see are a compilation of parts put together by independent companies in China. The Chinese government has now put a stop to their export.”

The name Chang Jiang means long river and is named after the Yangtze River. “Most of them came with sidecars although some can be purchased without,” Clive said. “They have a reputation for being incredibly unreliable. However, I toured northern WA with my wife, fully loaded, and it never broke down. The key is preventative maintenance. You have to play with them. I spend two days checking everything and during the trip I check it again at least once a day.”

Then there’s Clive’s newest classic, the 1988 FZR250 Yamaha. “This was a Japanese market motorcycle with an EXUP (electronically controlled) exhaust. This one still has that in pristine condition. It redlines at 18,000 RPM. It’s a race bike for the street.”

JAWA PERAK

Year: 1953

Make: Jawa

Model: Perak 250

Mileage: 3,400 km since restoration

Motor: single cylinder with dual port

250 CC two stroke.

Restoration: Absolutely everything was restored, every nut and bolt.

Manufactured: 1948 to 1954 in Czechoslovakia

CHANG JIANG

Year: 1968

Make: Chang Jiang CJ750

Model: M1S

Mileage: 11,000 km – original mileage

Motor: Boxer 750 CC – 12 volt with overhead valves with reverse.

Looks like a BMW motor

Restoration:

Mostly cosmetic restoration including, seat, handle bar and controls, wheels carburetor, minor cosmetics/nuts/bolts restored. Side car somewhat restored on the interior and the windshield. All lighting upgraded to LED.

Manufactured: early 1960s in China, ceased assembling around 2018

YAMAHA

Year: 1988

Make: Yamaha

Model: FZR250

Mileage: 18,000 original km

Motor: 250 CC, 4 cylinder, 4 stroke

Restoration: Bike is basically all original

Manufactured: This exact model made only in 1988 in Japan

From West Shore Life + Style magazine

Lifestylemotorcycle

Get local stories you won't find anywhere else right to your inbox.
Sign up here

Just Posted

COVID
Red Deer down to 313 active cases of COVID-19

Alberta reports an additional 411 COVID-19 cases

Seniors in the 65-unit Piper Creek Lodge are among those waiting for COVID-19 vaccinations. (File photo by Advocate staff)
Central Alberta senior lodges anxiously waiting for COVID-19 vaccinations

“Should be at the front of the line, not the back of the line”

THE CANADIAN PRESS/Alex Panetta
Economists “cautiously hopeful” for economic recovery in Alberta

Charles St. Arnaud says Alberta’s recovery will rebound along with roll-out of the COVID-19 vaccine

Alberta’s chief medical officer of health Dr. Deena Hinshaw acknowledged that Friday would be one year since the first case of COVID-19 was identified in the province. (photography by Chris Schwarz/Government of Alberta)
Three more Red Deer COVID-19 deaths, 331 active cases in Alberta

Red Deer is down to 362 active cases of the virus

Caitlin Kraft, the sister of Jeffery Kraft, stands third from the left, holding a sign calling for the maximum sentence for Campbell, who is charged with manslaughter. (Photo by Paul Cowley)
UPDATED: Judge again rejects submission of 7-year sentence for slaying of Kraft

Tyler John Campbell charged with second-degree murder for December 2019 homicide

Supporters rally outside court as Pastor James Coates of GraceLife Church is in court to appeal bail conditions, after he was arrested for holding day services in violation of COVID-19 rules, in Edmonton, Alta., on Thursday March 4, 2021. THE CANADIAN PRESS/Jason Franson
‘Law remains valid:’ Pastor accused of violating health orders to remain in jail

The Justice Centre for Constitutional Freedoms is representing the pastor

A decommissioned pumpjack is shown at a well head on an oil and gas installation near Cremona, Alta., Saturday, Oct. 29, 2016. The Alberta Energy Regulator says it is suspending all of the licences held by an oil and gas producer with more than 2,200 wells and 2,100 pipelines after it failed to bring its operations into compliance. THE CANADIAN PRESS/Jeff McIntosh
Alberta Energy Regulator suspends licences of oil and gas producer that owes $67M

The company is being asked to comply with past orders to clean up historic spills and contamination

Prime Minister Justin Trudeau holds a press conference in Ottawa Friday, March 5, 2021. THE CANADIAN PRESS/Sean Kilpatrick
Trudeau holds firm on premiers’ health-care funding demands, COVID-19 aid comes first

Premiers argue that the current amount doesn’t keep pace with yearly cost increases of about five per cent

Pictured here is Stettler’s Jenner Smith with a guide dog from Aspen Service Dogs. An online auction will be running soon to help raise funds for Jenner to receive his very own service dog later this year. Jenner, who is four years old, was diagnosed with Autism Spectrum Disorder in 2019. photo submitted
An online auction is planned to raise funds for a service dog for a Stettler family

Jenner Smith, four, was diagnosed with Autism Spectrum Disorder in 2019

Walter Gretzky father of hockey hall-of-famer Wayne Gretzky waves to fans as the Buffalo Sabres play against the Toronto Maple Leafs during third period NHL hockey action in Toronto on Tuesday, Jan. 17, 2017. THE CANADIAN PRESS/Nathan Denette
Walter Gretzky, father of the Great One, dies at 82

Canada’s hockey dad had battled Parkinson’s disease and other health issues

This Dec. 2, 2020 photo provided by Johnson & Johnson shows vials of its Janssen subsidiary’s COVID-19 vaccine in the United States. THE CANADIAN PRESS/AP-Johnson & Johnson via AP
Canada approves Johnson & Johnson’s 1-shot COVID-19 vaccine

It is the 4th vaccine approved in Canada and the 1st that requires just a single dose

(AP Photo/Richard Vogel, File)
Pandemic stress, isolation key factors as to why Canadians turned to cannabis, alcohol

Study found that isolation played key role in Canadians’ substance use

Most Read