(AP Photo/Mark Zaleski, File)

Check your EpiPen packaging for defects before you need it: Health Canada

Agency says the device itself could get stuck inside its holder

The makers of the EpiPen are warning that a “very small number” of the devices could get stuck inside their packaging, delaying their use and possibly leading to disability or death.

Pfizer Canada has told Health Canada that in some cases, the label on the EpiPen, an auto-injector that treats anaphylactic allergic reactions, has been incorrectly applied and could stick to the inside of the carrier tube or outer packaging.

According to the company, that means the device might not slide out of its package quickly enough.

The products affected are:

  • EpiPen (0.3 mg) (DIN 00509558) products that expire between April 2018 and October 2019
  • EpiPen Jr (0.15 mg) (DIN 00578657) products that expire between April 2018 and October 2019

Pfizer is not recalling any of the devices, but is asking pharmacists and patients to make sure their device slides out properly before they’re needed in an emergency.

To do so, you should:

  • Flip open the carrier tube cap, gently turn the tube upside down and let the device slide out into your hand
  • Do not remove the blue safety release from the auto-injector device
  • If your device sticks or does not slide out easily from its tube, or the device label has unglued edges, return it to your pharmacist for replacement
  • Do not attempt to remove or re-attach the label under any circumstances.

The company said no cases of this happening have been reported in Canada.

Packaging woes aren’t the only issue affecting EpiPens: this summer, the company warned Health Canada that “manufacturing issues” could lead to a shortage of the live-saving device.

Health Canada says the disruption in supply continues.


@katslepian

katya.slepian@bpdigital.ca

Like us on Facebook and follow us on Twitter.

Just Posted

Sylvan Lake Midget Buccaneers secure playoff spot

The Midget Buccs defeated the Didsbury Chargers 11-6 on June 15 to close out regular season play

Sylvan Lake Yettis clinch league’s top spot

The Yettis have a first round bye and will play the second round of playoffs on home court, July 5-7

MP Blaine Calkins tables rural crime bill

Bill C-458 was tabled Friday, and proposes to amend the Criminal Code to account for rural residents

Sylvan Lake breaks ground on new water reservoir project

Town Council and staff were present at the ground breaking of the new reservoir, June 17

Mural for Sylvan Lake Community Food Bank underway

The 40 foot mural is a paint-by-number design in order to involve the community

VIDEO: Trans Mountain expansion project gets green light, again

Prime Minister Justin Trudeau announced the decision in Ottawa on Tuesday afternoon

Horgan says he’ll still defend B.C. coast after second Trans Mountain approval

Meanwhile, one B.C. First Nation has announced plans for a legal challenge

Demonstrators on either side of Trans Mountain debate clash in Vancouver

Crowd heard from member of Indigenous-led coalition that hopes to buy 51% of expansion project

High Level on alert, as wildfires put more people on the run in northern Alberta

Thousands in High Level were just allowed back home, and now must get ready to leave again

VIDEO: Toronto Raptors announcer credited with calming crowds after shooting

Matt Devlin, the Raptors’ play-by-play announcer since 2008, was praised for preventing panic from spreading

Two people arrested after Wetaskiwin vehicle theft

Wetaskiwin RCMP respond to theft of motor vehicle

Deadline for cabinet to decide future of Trans Mountain expansion is today

International Trade Minister Jim Carr described the decision as ‘very significant’

UPDATE: Two shot, two arrested at Toronto Raptors victory rally

The team and several dignitaries, including Justin Trudeau, remained on stage

Oil and gas sector cautious as deadline on Trans Mountain decision nears

Trudeau government expected to announce whether it will approve pipeline for second time on Tuesday

Most Read